高速公路波形護欄掉漆的原因是什么？

　　相信大家在戶外活動的時候都會遇到有些公路波形護欄掉漆的現象，但是您了解為什么會出現這種情況嗎？今天我們波形護欄廠家就為大家全面分析一下導致護欄掉漆的原因有哪些：

　　常見的波形護欄是利用靜電粉末噴涂來對外觀進行美化防腐的，也就是咱們常說的噴塑處理，它有色彩鮮艷多樣化，防腐防銹、抗老化性能好的特點，而噴涂的效果

　　例如我們比較常見的金屬、亮光以及平光等，有一部分會出現掉漆的原因，跟我們的噴涂粉末量以及性能上有著很大的關系；還有就是塑粉質量不好，顆粒大小不均勻；

　　進行熔化的溫度上有偏差，通常溫度必須在兩百攝氏度以上塑粉才可以融化完全。還有一點就是在包裝上運輸中出現了問題，有比較尖銳的物品劃傷等。再就是，車輛行駛中碰撞、剮蹭到波形護欄，都會造成波形護欄表面受損掉漆。

　　What is the reason that freeway wave form guardrail drops paint?

　　I believe that everyone in the outdoor activities will encounter some of the phenomenon of road wave guardrail paint, but you know why this situation will occur? Today we waveform guardrail manufacturers for you to a comprehensive analysis of the causes of paint guardrail:

　　Common wave barrier is the use of electrostatic powder spraying to beautify the appearance of anti-corrosion, that is, we often say spray treatment, it has bright colors and diversity, anticorrosion and anti-rust, anti-aging performance is good characteristics, and the effect of spraying

　　For example, we are more common metal, light and flat light, some of the reasons for the paint will fall, and our spray powder amount and performance has a great relationship; There is plastic powder quality is not good, particle size is not uniform;

　　There is a deviation in the melting temperature, usually the temperature must be above 200 degrees Celsius plastic powder can be melted completely. There is also a problem in the packaging of transportation, there are more sharp items such as scratches. Then, the vehicle driving collision, rub into the waveform guardrail, will cause the waveform guardrail surface damage paint.